Mountain Steed Springs by SRP for Rock Shox Judy DH SL XC FSX & Quadra Speed EFC

$24.28 (-40%)

473

  • Wheel Size: 26 in
  • Suspension Travel: 2, 2.5 and 3
  • Restocking Fee: No
  • Part Type: Springs
  • All returns accepted: Returns Accepted
  • Fork Type: Suspension
  • Condition: New
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Brand: Rockshox
  • For Bike Type: Mountain Bike
  • Mountain Steed Springs by Specialty Retro
    Products
    Specialty Retro Products has developed a line
    a custom made springs to replace your worn out elastomers (aka MCU’s). These
    springs will work with all 3 stock travel lengths. They are now compatible with
    all top cap types supporting a wider range of forks with just one design. These
    kits are engineered and custom made using corrosion resistant material to work specifically with these specified forks. These are
    not an off the shelf items that sort of work and make a lot of noise. They are
    the real deal.
    Rockshox had have some variation in there Judy
    damper cartridge sizes as well as top caps so our kits include tuning
    chips that can be added to compensate for all sizes.
    Your kit will include detailed installation instructions for the Judy forks as well as some additional maintenance tips to keep your shock running longer. Your springs should always be installed well
    greased. All kits will include a 1/2 oz tube of Slickoleum Suspension Grease
    which is equivalent to the manufacture recommended Judy Butter.
    If you have the 95/96 forks don’t forget to
    add a new set of dust wipers or a Titanium bolt upgrade kit. See our other
    listings.
    These kits will work with the
    following forks:
    1995 and 1996 RockShox Judy XC, SL, DH and
    Specialized FSX
    1997 and 1998 RockShox Judy C, XC and SL
    1997 and 1998 RockShox Indy C, XC and SL
    1995 and 1996 RockShox Quadra 21R
    Manitou EFC (YES Manitou EFC forks uses the same kits, these forks have 3″ of travel)
    The length of the forks travels has an influence
    on the way the springs ride based on your rider weight. We have developed a chart
    to help you decide which color is right for your application. If you fall into
    a category with two colors to choose from the color on the left will be
    slightly firmer and the color on the right will be slightly softer.
    Please see the second image above for the chart.
    If you are unsure of your forks travel here is
    a rough guild. The 1995 and 1996 Judy XC, SL and FSX can standard with the 2”
    or 2.5” of travel. The 3” travel was an upgrade option for those forks. The
    Judy DH from those years’ came standard with the 3” travel. If you want to
    confirm the actual travel you can do it one of two ways.
    -If the fork is still working properly, lift
    up the black rubber boot/cover on one of the legs and add some grease or a snug
    ziptie around the leg right at the rubber seal. Ride the bike and try to fully
    compress the shock until the feel it bottom out on rubber stop. Lift the boot
    back up and measure how far up the fork leg the grease or ziptie has moved.
    -If your MCU/Elastomers are dead the fork will
    most likely be in the fully compress position. Lift up the rubber boot and add
    a piece of take onto the leg just above the black rubber seal. Then lift up
    from the stem with one hand and push down on the front wheel with the other
    hand until the legs are full extended. Lift up the boot and measure the
    distance between the piece of tape you added and the black rubber seal.
    Our
    kits maximize all of the available space inside the fork legs. If your old
    elastomers have started to corrode the inside of the tube installation of the
    springs can be difficult. If you are unable to install the spring we will take
    them back and issue a refund.
    One of our customers made an installation video if you would like to see what is involved. https://youtu.be/HZIbFsbqeDU
    Here
    at Specialty Retro Products we stand behind the products we sell. We are here
    to help you trouble shoot any problems. If you have a problem with your kit
    that we cannot solve we will take the kit back and issue you a refund.
    Anyone
    purchasing multiple items international could see double shipping costs due to
    the way that ebay adds ups the items. We can either refund you the difference
    or you can request a new invoice with the corrected shipping cost prior to
    payment.
    These
    springs are comparable to several made back in the 90’s. Such as Mountain speed
    springs, Risse, White Brother, White Bros, Kronos and Wings springs. Vintage Old school Oldschool classic OG

    Main Menu